Marine AC UPS Power Supply
[Search Related Products]Marine AC UPS Power Supply Application
Power supply adopts the control mode of pulse width modulation, power supply has the advantages of small size, high efficiency, stable output waveform, etc.
Marine AC UPS Power Supply has the characteristics of general UPS power, while considering the characteristics of the ship and the environmental requirements, the power supply products according to ABS and CCS specifications for design, meet the standards of marine electric.
Marine AC UPS Power Supply Features
1)pure sine wave output: the effect of AC input harmonics on the load can be completely be inhibited,and it can always provide a full range of protection and high quality sine wave power supply.
2)the input AC voltage range is 176-264VAC, the input frequency is 45HZ-65HZ. Output DC DC20-32V.
3)advanced battery management: three step charging,float charging,equalizing charge can be automatic converted, improved the battery protection.
4)perfect protection measures: output short circuit, overload protection, the whole machine overheat protection; the input DC protection and the protection of DC over voltage protection.
5)When the AC power out,the power supply can be switched to the input DC power supply (or battery power supply) uninterruptedly,so as to ensure uninterrupted output.
Marine AC UPS Power Supply Technical Data
Model | HSMU |
Input Voltage | AC220V¡À20% |
Input Current | 20-36VDC,need to be indicate if need AC and DC input |
Output | AC220V¡À1% Frequency 50HZ¡À0.5% |
Output Waveform | Pure sine wave, THD = 3% (resistive load) |
Output Power | 600VA-30KVA |
Efficiency | ¡Ý82% |
Insulation strength | Input to output AC1500V, input AC to DC AC1500V Input AC to the housing AC1500V, input DC to the housing DC1000V |
Battery | Built in 24V lead acid battery (also available in other form of battery or external battery) |
Protect Grade | IP20,IP22¡¢IP44,or any other grade customer requested |
Protect Function | Over-voltage,Under-Voltage of DC input(Optional) and over-current and short circuit for output,Over-heating(Internal heat sink temperature more than 85¡æ) |
Marine AC UPS Power Supply Service Condition
Working temperature | -10¡æ¡«50¡æ |
Storage Temperature | -40¡«85¡æ |
Relative humidity | ¡Ü90%(40¡À2%) |
Atmospheric pressure | 70¡«106Kpa |
Transverse inclination | ¡À15¡ã |
Trim | ¡À5¡ã |
Rolling | ¡À45¡ã(Cycle 5¡«12S) |
Pitching | ¡À10¡ã(Cycle 5¡«7S) |