HAV-Pneumatic venturi angle valve
[Search Related Products]
HAV - Pneumatic venturi angle valve
Material:
Valve body: ZG230-450, ZG1Cr18Ni9Ti, 316, 316L, anti-corrosion alloy
Valve seat: 1Cr18Ni9Ti, 316, 316L, anti-corrosion alloy, F4
Packing material: PTFE, flexible graphite
Diaphragm material: NBR
Nominal dimension (mm) | 25 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | |||||||||||||||||||
Seat diameter (mm) | - | - | - | - | - | - | 20 | 25 | 32 | 25 | 32 | 40 | 32 | 40 | 50 | 40 | 50 | 65 | 50 | 65 | 80 | 65 | 80 | 100 | 80 | 100 | 125 |
Rated flow (Cv) | 1.0 | 1.6 | 2.5 | 4.0 | 6.3 | 10 | 11 | 17 | 24 | 17 | 24 | 44 | 24 | 44 | 68 | 44 | 68 | 99 | 68 | 99 | 175 | 99 | 175 | 275 | 175 | 275 | 395 |
Rated travel (mm) | 14.3 | 25 | 38 | 50 | |||||||||||||||||||||||
Rangeability | 25:1 | ||||||||||||||||||||||||||
Nominal pressure | JIS 10, 16, 20, 30, 40K; ANSI 125, 150, 300, 600; JPI 125, 150, 300, 600; PN1.6, 4.0, 6.4MPa | ||||||||||||||||||||||||||
Flow character | Equal percentage, Linear | ||||||||||||||||||||||||||
Core type | Single seat plunger type | ||||||||||||||||||||||||||
Flange standard | JB78-59, JB79-59,JB/T79.1-94, JB/T79.2-94, ANSI, JIS, DIN etc | ||||||||||||||||||||||||||
Bonnet | Normal temp type (-17~230oC); Extension Άρ(-45~-17oC, 230~566oC); Extension Άς(-100~-45oC); extension Άσ(-196~-100oC) | ||||||||||||||||||||||||||
Action type | Air to open, air to close | ||||||||||||||||||||||||||
Actuator | ZHA/B multi spring pneumatic diaphragm actuator | ||||||||||||||||||||||||||
Accessories | Positioner, solenoid valve; air filter pressure reducing valve, limit switch, valve position feedback device, emergency actuating device, handwheel etc |