Sea Water Hydrophore System

1. Hydrophore system description:

The sea water hydrophore system used for vessel washing. There with double high quality strong pressre pumps (one for stand-by), pressure gauge, pressure gauge valve, safety valve, pressure switch, etc.

1). Pressure gauge: to show the pressure in tank.

2). Pressure gauge valve: to control the start and stop of water pump. When the pressure in tank is under 0.4Mpa, the water pump will start to feed water into tank until the pressure reaches 0.6Mpa.

3). Safety valve: When the pressure in tank is more than 0.63Mpa, the safety valve will open to release the pressure in tank.

4). Liquid level indication: to show the water level condition in tank.

5). Charge valve: to charge the compressed air into tank.

6). Ball valve: to empty the water in tank when maintaining.

7). Water inlet and outlet: connected to the outlet of water pump to inject water into tank.

8). Water outlet: connected to water header pipe for the use on board.

9). The water outlet of safety valve:to discharge the pressure water. It is connected to bilge.

10). Discharging outlet: to empty all of the water in tank. It is connected to bilge.

2. Main technical parameters:

1). Volume: 0.12-3.0m3

2). Working pressure: 0.4Mpa-0.6MPa

3). Design pressure:0.4Mpa- 0.7MPa

4). Strength test pressure: 1.05MPa

5). Air tightness test pressure: 0.875MPa

6). Open pressure of safety valve: 0.63MPa

Model	Volume(m3)	Design Pressure(Mpa)	Working Pressure(Mpa)	Water Pump Model	Motor Power(kw)	Capacity(m3/h)	Pressure(Mpa)
ZYG-0.12	0.12	0.4~0.7	0.4~0.6	1.5CWX-2 (optional)	2.2 (optional)	3	0.4
ZYG-0.3	0.3
ZYG-0.5	0.5
ZYG-1.0	1.0
ZYG-1.5	1.5
ZYG-2.0	2.0
ZYG-3.0	3.0

3. Warranty: 12 month

Quantity be approved by IMO, all kinds class certificate can be supply.