FA-DPYC Shipboard Power cable 0.6/1KV

FA-DPYC Shipboard Power cable 0.6/1KV Application
For fixed installations on ships and offshore-units in all locations.Flame-Retardant,Double core,EP rubber insulated,PVC sheathed,Steel wire braid Shipboard Power cable.

FA-DPYC Shipboard Power cable 0.6/1KV Cable Construction
1.Conductor:Stranded tinned annealed copper wires as per JIS C 3410.
2.Insulation:(EPR),Ethylene Propylene Rubber.
3.Cabling:Flame retardant and non-hygroscopic fillers may be used.Suitable tape may be applied on the cabled core.
4.Sheath:(PVC),Polyvinyl Chloride.
5.Armor:Galvanized steel wire braid.Coverage density is minimum 90%.
6.Paint:The white paint shall be painted uniformly on the steel wire braid.
7.Core identification:2 Core:Black,White

fa-dpyc-shipboard-power-cable-0-6-1kv

FA-DPYC Shipboard Power cable 0.6/1KV Standard
Design:JIS C 3410:2010
Flame retardant:IEC 60332-1 & IEC 60332-3 Category A(FA-Type)

FA-DPYC Shipboard Power cable 0.6/1KV Code

Conductor	S(D,T)	Tinned annealed stranded copper, class 2 according to IEC 60228
Conductor screen		Semi-conducting compound
Insulation	P	85°C EPR as per IEC 60092-351
Cabling		Insulated conductors shall be cabled. Flame retardant & non-hygroscopic fillers may be used
Overall shield	S	Tinned copper wire braid
Bedding	Y	PVC as per JIS C 3401
Armor	C (CB)	Galvanized steel wire braid(-C TYPE) or copper alloy wire braid(-CB TYPE)
Sheath	Y	PVC as per JIS C 3401
Core identification		1C Black 2C Black, White 3C Black, White, Red
Outer sheath color		Black

We will provide you with the best quality, competitive prices and satisfactory service.

For more enquiries ,please contact freely at cable@hiseamarine.com